|
|
Build Your Online Product Catalogs?
| Product Name: |
High quality arms street lamp
|
| Supply Ability: |
100000 sets |
| Related proudcts |
street lamps, the led street lamp, |
| Specifications |
A variety of specifications, delivery according to customer requ |
| Price Term: |
FOB |
| Port of loading: |
|
| Minimum Order |
50 |
| Unit Price: |
Negotiable |
|
Product parameters
Light pole technical specifications
1. The light pole height 5-15 meters, the main pole by a large bending machine molding, 2.2 6 mm wall thickness, specific appearance and size according to customer requirements customization.
The material
2. The light pole material for high quality low silicon carbon steel Q235A steel (including Si 0.04% or less, the yield strength > 245 ***; material conform to the standards: GB699-88.
Welding process
3. The entire rod body shall be no cracking, leakage welding, continuous pores, bite side, weld smooth level off, without bump ups and downs, do not have any weld defects, provide the weld inspection reports, welding standard basis: GB/T3323-1989 iii. Safety standards in line with the national standard GB7000.1-7000.5-1996
Electric door
4. A. electric door use plasma cutting! B. the appliances in the lamp body one integrated mass, the door not welded convex platform, high structural strength. C. have reasonable operating ***ce, gates has electrical installation accessories. D. the door in the gaps between the rod should not be more than a millimetre, good waterproof performance. E. have special fastening systems, good anti-theft performance of the fixed bolt adopts the general tools to open. F. electrical door should have high interchangeability, door have reasonable operation ***ce, providing 3% of the electric door accessories. G. place firmly welding work in light pole door lower left a M8 * 30 bolt with light pole for hot dip galvanized processing, used to connect the cable PE line.
Hot dip galvanizing process
5. Using heat invasion acid inside and outside surface anti-corrosion treatment, the thickness of p 75 um, accord with GB - / T13912-92 standard, design service life of 30 years or more, the galvanized surface should be smooth and beautiful, the color, after the hammer test is not peeling, not peeling off. Galvanized provide test report.
Coating process
6. Coating by using pure polyester molding powder, outdoor color to white, plastic laye |
| Company: |
jiangsufangdaguangdiankejiyouxiangongsi
|
| Contact: |
Mr. zhu hongwei |
| Address: |
Tianshan mountain town of weft number 18 |
| Postcode: |
225653 |
| Tel: |
051480956681 |
| Fax: |
051480953588 |
| E-mail: |
|
|
|
|
Home
